The Preparation and Painting Process. If the furniture has a shiny coating or has been painted previously, sand it with a light touch and a fine-grit sanding block, wiping it down with a soft cloth afterwards to remove dust. If the wicker is designed for outdoor use, it may be made of a synthetic material such as polyethylene or polyurethane.

How To Distress Paint Furniture Waiting 100 years for it to age to this condition is not something any of us have time for. That is why learning to paint and distress your own furniture can be a valuable resource and skill to have. Painting and distressing furniture can be a great way to transform old or dated space.How To Protect Garden Furniture

Some slick new furniture. into an outdoor diner. The cushions should be stored indoors when not in use and the table and seating will benefit from being covered to protect it from the elements when.

Then use a shop-vac with an attachment to vacuum into the nooks and crannies of the wicker. Use a damp microfiber cloth to carefully clean the wicker. Make sure you use the right paint for the material your furniture is made from. You’ll also need to consider the elements (indoor vs outdoor; covered porch vs exposed patio, etc.) when choosing.

Design Furniture Designer Furniture furniture design gallery is Central Florida’s premier custom furniture builder. For over twenty five years furniture design gallery has been delighting clients with custom built wall units, Home Entertainment Centers, Entertainment Consoles, Home Office Suites, Home Theaters, Designer Kitchens, Vanities and Closets.

Note that curing time is the process of the finish hardening to full strength before subjecting it to full use.Unless the paint color is very similar to the current color of the chair, several cans of spray paint per wicker chair will be needed to get into all the nooks and crannies involved in a wicker piece of furniture.

How To: paint wicker furniture step 1. Start by setting up your work area. step 2. With the dust attachment on your vacuum, clear away any loose dust, dirt, STEP 3. With a sponge and soapy water, wash down the wicker. STEP 4. Next: It’s time to prime. Use an oil-base spray primer formulated.

Use paints formulated for use on wicker furniture, and paint your pieces completely from top to bottom, and on the underside of arms and seats, at least every three years. Apply two coats of marine varnish on top of the paint to provide waterproofing.

To protect your belongings, move them all well out of the way. Place the wicker piece on a drop cloth, not only to catch the paint, but also to prevent debris from interfering with your finish. STEP 2. With the dust attachment on your vacuum, clear away any loose dust, dirt, and cobwebs from the furniture.